SV8500介绍.pptVIP

Copyright(C), NEC Engineering Copyright(C), NEC Engineering 内容 总体介绍 硬件配置 软件结构介绍 应用服务介绍 终端 1-1. 总体介绍(1/2) 1-1. 总体介绍 (2/2) 3.软件结构介绍 4.应用服务介绍 由于SV8500的架构和IPX/SV7000相比发生了一定变化,所以双CPU的切换和注册过程也发生了相应改变。 CPU 切换方式 ?CPU 切换大致需要 2-3 秒。 ?SIP 话机和其他设备/终端(见 Note.1)具有不同的切换方式。 (2) 终端注册过程 ?为了冗余配置而设定在设备/终端上的注册目的地是“Virtual IP Address of 1G(#0)”。 ?终端运行时具有负载平衡冗余方式, 比如 DtermIP, 过程如下. 5. 终端 SV8500 ”Eco” 产品 SV8500 符合环保设计的理念 符合RoHS标准 去除很多化学制品的使用来减少二氧化碳排放 使用对环境无害的化学制品 在接口电路卡中取消使用铅和汞 功耗: 减少大约23% (Note) 构成: 节省大约41% (Note) 从2003年开始提供电子操作手册来代替印刷手册 CMP=Common Memory Processor, CMG=Common Memory Group We should study the IP-PAD PKG with minimum delay time for the voice quality. (*1) SR-MGC(2U) software should be maintained for a while after R27 since it will be sold with SV8500 in early stage. How to maintain is under study. TP works on NEC’s OS. TP’s driver works only on NEC’s OS. TP’s software structure can’ t be used with any OS other than NEC’s OS. C sources of “Call Control” are used by SV7K/IPX and SV-NEXT. Assembler sources of “Call Control” are translated to GAS.  (GAS - GNU Assembler) Source of “System Control” will be newly developed and Linux System call is used in cases where “System Control” operation is possible by Linux. Since, TP’s Linux Porting is expected to be VERY DIFFICULT, Certain functions can’t be released in STEP1(Nov 2007 4-1 网络接口配置 4-2 CPU冗余配置 4-3 网络可靠性 Legacy Fusion (area A) CPU模块中内置了4个以太网接口 IP Phone Wireless IP Phone MG PSTN User NW Admin NW Servers MAT P2P Fusion P2P CCIS Super MCMG OAISMDRMISPMS MCI NMS SNMP CCIS over IP Capacity Enhancement Remote Nodeover IP SV8500 PIR FCH (area B) FCH (area A) Legacy Fusion (area B) (１) 端口配置情况 (#0) (#2) physical IP physical IP physical IP172.16.253.１ physical IP 1Gbps 100Mbps (#1) (#3) (#0) (#2) (#1) (#3) Speed SV8500Ether port system 1 system 0 STBY ACT virtual IP (associated to ACT)00 virtual IP (associated to ACT)00 Terminals on User Network communicate with ACT with virtual IP (#0