基于DSP控制的正弦波和三角波发生器的设计自动化专业毕业论文.doc

毕业设计 题目名称 基于DSP控制的正弦波和 三角波发生器的设计 学院 电气信息工程学院 专业/班级 自动化09102 学生 学号 指导教师（职称） 葛延津（教授）严海领（助教）  摘 要 信号发生器发展到今天，在电子测试、电子设计、模拟仿真中，扮演着一个重要的角色，极大加快了电子测试与设计工作中的效率，在电子技术和信号仿真应用中已发挥了巨大的作用TMS320VC5402 DSP为主的信号发生器的设计情况。这是一个以DSP为核心来实现信号发生器的系统，该系统具有结构简单灵活，抗干扰能力强、产生频率较高、应用广泛等特点。 该系统的组成核心TMS320VC5402 DSP芯片是TI公司生产的16位定点处理芯片，它有运算速度快、具有可编程特性、接口灵活和外围电路丰富等特点。选择该芯片作为设计信号发生器的核心芯片，能够提高信号发生器所产生信号的频率，使信号发生器有更加广泛的应用。本设计的硬件部分是有该DSP芯片和D/A转换芯片TLC7528组成，DSP芯片用于产生各种波形，D/A转换芯片用于把数字信号转换为模拟信号。在以上硬件的基础上，通过软件编程来实现三角波、正弦波等波形。 关键词：DSP； D/A转换器； 信号发生器； 波形  Abstract Signal generator to today, in the electronic testing, electronic design, simulation, communications engineering, plays a very important role, has a very wide range of applications, greatly accelerate the efficiency of the electronic test and design work in the electronics technology and signal simulation applications has played a huge role. This paper describes the design to TMS320VC5402 DSP-based signal generator. This is a core DSP signal generator system, the system structure is simple and flexible, anti-interference ability, resulting in a higher frequency, widely used features. The System is comprised core TMS320VC5402 DSP chip is produced by TI 16-bit fixed-point processing chip, computing speed, programmable features, flexible interface and peripheral circuits rich features. Select the chip to chip as the core of the design of the signal generator, it is possible to improve the signal generator to produce the signal frequency, the signal generator has a broader application. The design of the hardware part is composed of the DSP chip and the D / A converter chip TLC7528 DSP chip for generating various waveforms, D / A converter chip used to convert digital signals to analog signals. On the basis of the above hardware, by software programming to achieve the waveform of the triangular wave, sine wave, etc.. Keywords: DSP; D / A converter; signal generator; waveform  目 录 第一章 绪论 - 1 - 1.1选