加工工厂设计论文.docVIP

  • 19
  • 0
  • 约6.61千字
  • 约 12页
  • 2018-03-13 发布于河南
  • 举报
加工工厂设计论文

玻璃纤维污水处理厂工程设计 高材102 201054575233 王大亮 摘要:结合抚宁某玻璃集团纤维分厂玻纤污水处理站设计及调试运转实例,设废水量为:500m3/d,每天24小时运转。采用絮凝沉淀/生物接触氧化/混凝沉淀/过滤作为处理工艺,则设计处理能力为20.8m3/h。设计出水达到《城镇污水处理厂污染物排放标准》(GB18918-2002)的一级标准。 关键词:玻纤废水;废水处理;生物处理法 Plant engineering design of glass fiber wastewater treatment Abstract:Setting the quantity of wastewater was: 500m3/h,24h/d.According to a Funing Glass Group plant fiber glass fiber wastewater treatment station design and debug operation example. The flocculation / biological contact oxidation / coagulation / filtration as the treatment process, the design treatment capacity of 20.8m3/h. The

文档评论(0)

1亿VIP精品文档

相关文档