定义CPU阀值,达到对功耗起一定的控制作用的修改教程.doc

这个要修改的文件在framework-res.apk里1.反编译不多说2.打开xml/power_profile.xml文件3.我们可以看到一般我们都是这个样子的：?xml version=1.0 encoding=UTF-8?device name=Androiditem name=none0/itemitem name=screen.on0.1/itemitem name=bluetooth.active0.1/itemitem name=bluetooth.on0.1/itemitem name=screen.full0.1/itemitem name=wifi.on0.1/itemitem name=wifi.active0.1/itemitem name=wifi.scan0.1/itemitem name=dsp.audio0.1/itemitem name=dsp.video0.1/itemitem name=radio.active1/itemitem name=radio.scanning0.5/itemitem name=gps.on1/itemarray name=radio.onvalue0.2/valuevalue0.1/value/arrayarray name=cpu.speedsvalue400000/value/arrayitem name=cpu.idle0.1/itemarray name=cpu.activevalue0.2/value/arrayitem name=battery.capacity1000/item/device上面的0，0.1这些是表示CPU一直全速，下面的400000表示空闲时低到400要实现自动调频，我们需要修改：array name=cpu.speeds value400000/value /array item name=cpu.idle0.1/item array name=cpu.active value0.2/value /array为：array name=cpu.speedsvalue1000000/valuevalue900000/valuevalue800000/valuevalue700000/valuevalue600000/valuevalue500000/valuevalue400000/valuevalue300000/valuevalue200000/valuevalue100000/value/array 本帖隐藏的内容 item name=cpu.idle10/itemarray?name=cpu.activevalue840/valuevalue760/valuevalue680/valuevalue520/valuevalue440/valuevalue360/valuevalue280/valuevalue200/valuevalue120/valuevalue40/value/array然后对上方自定义item name=none0/itemitem?name=screen.on50/itemitem?name=bluetooth.active140/itemitem?name=bluetooth.on1/itemitem?name=bluetooth.at35660/itemitem?name=screen.full110/itemitem?name=wifi.on5/itemitem?name=wifi.active120/itemitem?name=wifi.scan105/itemitem?name=dsp.audio75/itemitem?name=dsp.video80/itemitem?name=radio.active300/itemitem?name=gps.on175/itemitem?name=radio.scanning70/itemarray?name=radio.on 这就做到了对相应的到点值的CPU功耗调节的作用