安装GPGPU.doc

本文档介绍如何在Unbuntu9.04安装cudatoolkit2.3+cudasdk2.3+gpgpu-sim2.1.1b并编译运行ispass2009的benchmarks xmlnamespace prefix =o ns =urn:schemas-microsoft-com:office:office / 注：本文档主要依据gpgpu-sim自带的GPGPU-SIM Manual Version 1.0 Compiling GPGPU-Sim * Step 1: Ensure you have gcc, make, zlib, bison and flex installed on your system. For CUDA 2.x we used gcc version 4.3.2, for CUDA 1.1 we used gcc version 4.1.3. We used bison version 2.3, and flex version 2.5.33. * To use OpenCL: An installation of NVIDIA OpenCL drivers from NVIDIAs OpenCL Page. * GNU Compiler Collection (i.e. gcc) 4.0 or newer o gcc 4.3 recommended for CUDA 2.x o gcc 4.1 recommended for CUDA 1.1 * bison (version 2.3 recommended) 1.sudo apt-get install bison 2.ok. * flex (version 2.5.33 recommended) 1.sudo apt-get install flex 2.ok * zlib * The benchmarks from the ISPASS 2009 paper (distributed separately) have additional dependencies. 1.已有 * Step 2: Download and install the CUDA Toolkit and CUDA SDK code samples from NVIDIAs website: /cuda. If you want to run OpenCL on the simulator, download and install NVIDIAs OpenCL driver from /object/opencl-download.html. * An installation of CUDA which you need to download from NVIDIAs website. 1.Download cudatoolkit_2.3_linux_32_unbuntu9.04.run from /cuda-downloads. 2.给cudatoolkit_2.3_linux_32_unbuntu9.04.run添加执行权限： chmod +x cudatoolkit_2.3_linux_32_unbuntu9.04.run 3.运行 sudo ./cudatoolkit_2.3_linux_32_unbuntu9.04.run 设置路径为default即可 4.上述安装了cudatoolkit，还要安装cudasdk，下载cudasdk_2.3.linux.run 5.chmod +x cudasdk_2.3_linux.run 6.sudo ./cudasdk_2.3_linux.run 设置路径为default即可 * Step 3: Build libcutil.a. The install script for the CUDA SDK does not do this step automatically. If you installed the CUDA Toolkit in a nonstandard location you will first need to set CUDA_INSTALL_PATH to the lo