太阳能热储能有机相变材料热稳定性外文文献.pdfVIP

Applied Thermal Engineering 129 (2018) 1189–1196 Contents lists available at ScienceDirect Applied Thermal Engineering journal homepage: www.elsevi /locate/apthermeng Research Paper Investigation on thermal reliability and corrosion characteristics of glutaric acid as an organic phase change material for solar thermal energy storage applications G. Raam Dheep, A. Sreekumar ⇑ Solar Thermal Energy Laboratory, Centre for Green Energy Technology, Pondicherry University, Pondicherry 605014, India h i g h l i g h t s Identification of new organic fatty acid phase change material. Thermo-physical properties are reliable even after one thousand thermal charging and discharging cycles. Less corrosive and good compatibility with heat exchanger containment materials. a r t i c l e i n f o a b s t r a c t Article history: The successful implementation of the latent heat solar thermal energy storage system depends on the Received 14 March 2017 long term thermal stability and corrosion characteristics of phase change materials (PCM). Glutaric acid Revised 3 October 2017 (GA) is an organic PCM with phase transition temperature 94.97–99.20 oC and latent heat of fusion 184.8 Accepted 22 October 2017 J/g. Thermo-physical properties and corrosive nature of glutaric acid is investigated using accelerated Available online 24 October 2017 thermal cycle method under controlled conditions. The study was conducted upon 2000 thermal cycles