RT9261A-50GB-智联创新.pdf

SacPower 智联创新 Preliminary RT9261/A VFM Step-up DC/DC Converter General Description Features The RT9261 Series are VFM Step-up DC/DC ICs Minimal Number of External Components ( Only with ultra low supply current by CMOS process and an inductor, a diode, and a capacitor) suitable for use with battery-powered instruments. Ultra Low Input Current ( 5µA at Switch Off) ± 2% High Output Voltage Accuracy The RT9261 IC consists of an oscillator, a VFM Low Ripple and Low Noise control circuit, a driver transistor (LX switch), a Low Start-up Voltage, 0.85V at 1mA reference voltage unit, an error amplifier, resistors for 75% Efficiency with Low Cost Inductor voltage detection, and a LX switch protection circuit. +50 ppm/°C Low Temperature-Drift A low ripple and high efficiency step-up DC/DC SOT-89 and SOT-25 Small Packages converter can be constructed of this RT9261 IC with only three external components. Applications Power source for battery-powered equipment The RT9261A IC provides with a drive pin (EXT) for Power source for cameras, camcorders, VCRs, an external transistor, so that a power transistor can PDAs, pagers, electronic data banks, and hand- be externally applied. Therefore, the RT9261A IC is held communication e