采矿工程鸡西矿业集团平岗煤矿1.2Mta新井设计参考.docVIP

PAGE PAGE I 摘 要 此次设计的是鸡西矿业集团公司平岗煤矿1.2Mt/a新矿井设计，总共有3层可采煤层，它们分别为33#、35#、38#， 煤层总厚度为6.6 m，煤层工业牌号为1/3焦煤。井田走向长度平均为5839 m，倾向长度平均为2876 m，煤层平均倾角为19°，设计井田的可采储量为102.09 本设计矿井采用双立井的开拓方式，划分为2个水平，18个采区。两个工作面达产，达产时采区个数为两个。33#层单独开采，35#、38#层集中开采。大巷运输采用10t架线式电机车牵引3t底卸式矿车运输，采用的采煤方法为走向长壁采煤法，采煤工艺为高档普采采煤工艺。顶板处理方法为全部垮落法。年工作日为330天，采用“四—六”式工作制，工作面长为190m，每刀进度为0.8m，每日割6 关键词: 矿井设计 集中大巷 走向长壁采煤法 全套图纸，加 Abstract This design is 1.2 Mt / a new mine design of the Jixi Mining Group Pinggang mine. There are three layers that can adopt the coal seam. They are the 33#, 35#, 38#. Total coal thickness is 6.6 m. Coal industry brands is 1 / 3 coke.The average strike length of the mine is 5,839 m. The average tendency length of the mine is 5,839 m. The average inclination of the mine is 19 °. Recoverable reserves of the mine design is 102.09 Mt. Design service life is 60.8a. The design of mine pioneering ways is double-shaft. It is divided into two levels and 18 mining area. Two work faces reaches to the produce,and mining area of reaching to the produce is two .33# layer is adopted alone.35# layer and 38# layer are adopted together. The big lane conveyance adopts 10 t a line type electrical engineering cars that leads 3 t bottom unload type mineral cars. Mining method is longwall mining method . Mining technology is high-grade general mining coal technology. Roof approach is the entire cross-loading method. Working days is 330 days every year. Work system us four-six work system. The length of working face is 190 m. Each knife progress is 0.8 m,and there are 6 times one day.The main well adopts Ji Dou promote,and vice-well adopts bottle of the cage promote. Key words:Mine design Concentrate big lane Longwall mining method 目 录 TOC \o 1-3 \h \z \u HYPERLINK \l _Toc 摘 要 PAGEREF _Toc \h I HYPERLINK \l _Toc Abstract PAGEREF _Toc \h II HYPERLINK \l _Toc 绪论 PAGEREF _Toc \h 1 HYPERLINK \l _Toc 第 1 章 井田概况及地质特征 PAGEREF _Toc \h 2 HYPERLINK \l _Toc 1.1 井田概况 PAGEREF _Toc \h 2 HYPERLINK \l