去Φ孔毛刺交叉孔去毛刺纤维油石刷文件.docxVIP

EZFINI Cross-Hole Deburring ToolEZFINI 交叉孔去毛刺纤维油石刷适用于交叉孔去毛刺及盲孔底部表面抛光的自动化工艺。最大长度可达170mmIdeal for the AUTOMATION of cross-hole deburring and bottom surface finishing of dead-end holes.Added Long Shaft (Full length 170mm)特性 Features氧化铝纤维线材制成的磨棒提供了强力的顶端研磨能力离心力使磨棒充分散开，可有效的去除交叉孔中的毛刺精确的去除机加工后基础厚度的小于0.1mm处的毛刺也可用于圆孔内壁的抛光或扩孔Powerful tip grinding with “XEBEC Cutting Fibesr” in rods made of Alumina Fiber abrasive stone. Centrifugal force spreads out the rods and efficiently removes cross-hole fine burrs in cylinders. Precision removal of all fine burrs where the base thickness is 0.1 mm or less after machining. Can also be used for polishing or scale removal on inner wall surfaces of cylinders. ?4mm交叉孔去毛刺过程Deburring of cross-hole burrs generated in ?4mm drill processing 加工方法：从主孔两侧加工Processing method：Processing from both sides of the primary processing hole.| 材料 Material：S45C | 使用工具 Applied Tool : EZ-A12-5M | 工具转速 Tool rpm : 10,000rpm | 主孔直径 Bore diameter in primary processing : ?10mm | 副孔直径 Bore diameter in secondary processing : ?4mm | 深入速度 feed rate : 5mm/sec 材料和构造 Material and Structure■ 材料世界上第一支陶瓷纤维油石制成的线材每一根氧化铝纤维由1000个水晶结构的氧化铝单体组成，每个单体的直径只有10微米，使得其顶端拥有1000个高密度的切削刃口。切削刃口可在加工过程中自行尖锐，以提供稳定而持续的研磨能力。One Alumina Fiber Rod is made by binding together 1,000 Alumina Fiber Filaments which have the ideal crystal structure for grinding, each is only 10μm in diameter. The tip has 1,000 high-density cutting edges.The self-sharpening action of the cutting edge on the Fine Alumina Fiber Rod tips provides superior grinding performance. Continuous cutting edges provide stable and continuous grinding performance. ■ 構造 硬质线材拥有高度磨削能力，灵活的刷子形状可以柔软的接触工作表面用途·事例 Usage, Applications■用途交叉孔去除毛刺（基础厚度0.1mm或更小）圆孔如螺丝孔的内壁抛光，去除EDM层盲孔底端表面抛光Removal of fine burrs (base thickness is 0.1mm or less) generated around cross-holes. Polishing of inner wall surfaces of cylinders such as screw holes, and removing EDM scale. Polishing the bottom surface of dead-end holes. ■事例查看应用动画部件 Workpiece name用途Usage加工内容Contents喷油器体