毕业论文终稿-400型水溶膜流研成型机的设计（送全套CAD图纸 答辩通过）.doc

摘 要 水溶性塑料薄膜（以下简称水溶膜）是一种新颖的绿色包装材料。它的主要原料是聚乙烯醇及淀粉，能溶于水，降解成无毒无公害的最终产物CO2和H2OABSTRACT Water-soluble plastic packaging films (hereinafter referred to water-soluble film) is a new green packaging materials, its main raw material is polyvinyl alcohol and starch, can dissolve in water, degradation of non-toxic pollution-free into the final product of CO2 and H2O. Its also the wider application of the workers, farmers and people in daily life have a wide range of use, and with the enhancement of environmental awareness among the people, the demand for water soluble film will also continue to grow. In this paper, 400 water-soluble film-forming system of research methods, the systems main principle is: first of raw materials under certain conditions, into water-soluble glue, and then glue to flow to the inquiry with stainless steel mirror ( Hereinafter referred to strip), the scraper will Smear glue evenly, with the strip into the rotation, bake film drying, peeling into the final finished film. Hung Road to the heat source in the system to the layout at the top of the heat and bake for sending me the built-in infrared Electric Road tube, the temperature is controllable. Scraper fixed in the upper strip, it can within a certain range from top to bottom mobilization, through its control of the gap between the strip and to achieve water-soluble film thickness control purposes. Strip was welded into a ring, installed in a large drum, the back-end to take the initiative to drum, drum major from the front of the bend, much like a belt-drive, water-soluble film is a film strip the carrier, is the driving force Moment of devices, this part of the design is very important. Keywords: Water-soluble film, Hung Road, belt drive, roller, scraper 目 录 第1章 绪论 1 1.1 水溶膜的简介 1 1.2 水溶膜的现状及展望 1 1.3 水溶膜的主要制备方法 3 第2章 系统总体设计 2 2.1 烘道的设计 2 2.1.1 主体结构材料的选择 3 2.1.2 整体尺寸和布局 3 2.1.3 供热系统的设计 5 2.2 钢带的设计 6 2.2.1 钢带性能的要求 6 2.2.2 钢带型号及尺寸的选择 7 第3章 传动装置的设计及计算 8 3.1 钢带传动 8 3.1.1 钢带传动的设计计算 8