可逆反击锤式破碎机的设计毕业论文资料.doc

本科生毕业设计（论文） 反击锤式破碎机的设计 Design of the Counter-hammer Crusher 中国矿业大学 2017年6月 摘 要 可逆反击锤式破碎机大量应用于水泥厂、电厂等各个部门，所以，它的设计有着广泛的前景和丰富的可借鉴的经验。本文叙述了破碎机的发展历史、分类，锤式破碎机的原理、分类、结构和特点，主要部件的参数设计，传动装置的选择与计算，轴及其零件的的设计计算，零件的安装、定位，并对个别的零件进行强度、寿命的计算，包括零件材料的选择，并对锤式破碎机的机架进行设计。本文还对反击锤的结构、尺寸和材质进行局部的改进，并且对反击板进行了一定的优化设计，优化设计后的反击板能充分利用破碎能，而且便于更换，减少维护成本。本次的设计的破碎机在实际生产中使得破碎装备的使用寿命，生产能力和安全系数得到大幅度的提升。 该论文有图28幅，表5个，参考文献26篇。 关键词：反击锤式破碎机；锤头；反击板；破碎；设计计算 Abstract Cyclonic static micro-bubble flotation is a new column separation method and device with China self-owned intellectual property. Reversible counter hammer crusher used in a large number of cement plants, power plants and other departments, so its design has a wide range of prospects and a wealth of experience can learn from. In this design, the development history, classification, hammer crusher principle, classification, structure and characteristics of the crusher are described. The parameter design of the main parts, the selection and calculation of the transmission, the design of the shaft and its parts Calculation, the installation of parts, positioning, and the strength of individual parts, life of the calculation, including the choice of spare parts, and hammer crusher rack design. In this paper, the structure, size and material of the counter hammer are improved locally, and the counterattack plate is optimized. The optimized counterattack plate can make full use of the crushing energy, and it is easy to replace and reduce the maintenance cost. The design of the crusher in the actual production makes the use of crushing equipment,Production capacity and safety factor has been greatly improved. There are 28 figures, 5 tables and 26 references in this article. Keywords: Counterattack hammer crusher; Hammer ; Counterattack plate; Crushing; Design and calculation 目 录 摘要 Ι 目录 III 1绪论 1 1.1课题研究的目的和意义 1 1.2破碎机的国内外研究概况 1 1.3碎煤行业发展状况 3 1