【精品液压培训资料】EATON 伊顿液压闭式系统操作原理讲解.pptVIP

Many Players, One Team;;CASE DRAIN;Reservoir, Application Guidelines Filler Cap May be Sealed or Breather Type Return and Outlet Line Must be Located Below Fluid Level Should include Baffle to Separate Inlet, Outlet Fluid Minimum Reservoir Size Should Not be Less Than 60% of the Maximum Charge Pump Size ;Heat Exchanger Application Guidelines A. Heat Exchanger size must be capable of Dissipating Approximately 25% of the Maximum Input Horsepower B. Must include a By Pass Valve to Limit Possible Excessive Case Pressure as Sometimes Experienced During Cold Starts (Case Pressure not to Exceed