毕业论文终稿-3520造纸机压榨部液压阀站设计(答辩通过).doc

摘 要 造纸技术作为衡量一个国家科技文化发达程度和现代化水准的重要标志，纸张及纸制品的消费对现代社会的经济和文化发展有着重要意义。造纸机是一个主要由流浆箱、成形、压榨、烘干、压光、卷取等部分组成的复杂的联动机组系统，有时根据具体生产的纸张种类不同，还需要配备机内涂布、半干压光部等辅助部件。 本文主要针对3520造纸机压榨部液压系统进行设计。首先，调查掌握了3520造纸机压榨部液压系统的现况；接着，对3520造纸机压榨机构结构及原理进行了分析，通过对结构原理的分析提出了液压系统设计方案，并通过计算选择了各液压元件以及验算了液压系统的合理性；然后，对液压油缸为进行了详细的设计与校核；最后，应用AutoCAD软件绘制了液压系统原理图、液压站装配图及液压缸的装配图和主要零部件图。 本文的研究方法对今后各类液压系统、液压站设计均具有很好的参考意义。 关键字：造纸机；压榨；液压系统；液压缸 Abstract Paper Technology as a measure of a countrys level of development and modernization of the cultural level of science and technology an important symbol, consumption of paper and paper products, economic and cultural development of modern society is of great significance. Is mainly composed of a paper machine headbox, the forming, the composition of pressing, drying, calendering, coiling unit linkage part of the complex system, sometimes depending on the production of different types of paper, but also with the coating machine, and a half dry calenders and other accessories. In this paper, the press section of a paper machine for the 3520 hydraulic system design. First, the status of the investigation and the 3520 paper machine press section of the hydraulic system; then, the structure and principles of 3520 paper machine press agencies were analyzed by analysis of the structural principle proposed hydraulic system design and selection by calculating each hydraulic components and checking the reasonableness of the hydraulic system; then, on the hydraulic cylinder for detailed design and verification; and finally, the application of AutoCAD software to draw a diagram of the hydraulic system, hydraulic cylinder assembly drawings and assembly drawings and principal Parts diagram. Research methods in the future all kinds of hydraulic systems, hydraulic station design have a good reference value. Keywords: Paper machine; Press; Hydraulic system; Hydraulic cylinder 目 录 摘 要 I Abstract II 目 录 III 第1章.绪 论 1 1.1研究背景及意义 1 1.2国内外研究情况及其发展 1 第2章.总体设计 4 2.1 3520造纸机压榨部液压阀站分析 4 2.1.1产品用途及