毕业设计（论文）-锡林浩特市热电联产汽水热交换首站工艺设计（全套图纸）_精品.docVIP

摘要 本设计为锡林浩特市热电联产汽水热交换首战工艺设计及U型管式水水换热器设计。设计供热负荷为60兆瓦，热电厂提供的蒸汽压力为0.65兆帕。U型管式水水换热器的设计参数根据热电联产汽水热交换首站工艺设计而定。随着人们生活水平的提高，集中供热被越来越多地采用，采用集中供热可以减少能量的浪费，提高供热效率，减少环境污染，利于管理，同时采用集中供热可提高供热质量，提高人们的生活质量。 通过本次设计要解决系统水利失调、浪费大量的热量，而使供热效果不理想的问题。不仅要使它满足人们生产，生活中的要求，还秉着节约资金，节约材料，节约能源，提高能源利用率的理念，来确定供热方案，其中不乏对前人经典设计思路的借鉴，并再系统压力不平衡处进行调节，以使整个系统水力平衡。 换热站课程设计是综合应用本门课程和有关先修课程所学知识，完成以单元操作为主的一次设计实践。通过课程设计使学生掌握换热站设计的基本程序和方法，并在查阅技术资料、选用公式和数据、用简洁文字和图表表达设计结果、制图以及计算机辅助计算等能力方面得到一次基本训练，在设计过程中能够培养学生树立正确的设计思想和实事求是、严肃负责的工作作风。 关键词： 换热首站 板式换热器 U型管换热器 全套图纸，加153893706 ABSTRACT This design for the cogeneration soda heat exchange opening process design and U type pipe type water water heat exchanger design. Designed heating load for 60 mw, thermal power plant to provide steam pressure of 0.65 million mpa. U type pipe type water heat exchanger design parameters according to the heat exchange first co-generation soda process design. As people living standard rise, the central heating is more and more, with central heating can reduce the waste of energy, improve the efficiency of heating, reduce the pollution of the environment, good management, at the same time, the central heating can improve the heating quality, improve the quality of peoples lives. Through the design to resolve hydraulic disorder and waste a lot of heat, and make the heating effect is not ideal. Not only to make it meet the production, life, also grasps to save money, save material, save energy, improve the utilization ratio of energy concept, to determine the heating scheme, there is no lack of to be reference to the previous classic design idea, and adjust the system pressure imbalance place again, in order to make the whole hydraulic balance system. Heat exchanger station course design is the integrated application of knowledge in this course and the related courses, to complete a design practice is given priority to with unit operation. Through the curriculum design enable students to master basic procedures and method