基于HVACSIM和MATLAB的空调系统仿真研究-计算机工程与应用.PDFVIP

Computer Engineering and Applications 计算机工程与应用 2012 ，48 （15） 227 基于HVACSIM+和MATLAB 的空调系统仿真研究 1 1 2 闫秀英 ，任庆昌 ，孟庆龙 1 1 2 YAN Xiuying , REN Qingchang , MENG Qinglong 1.西安建筑科技大学 信息与控制工程学院，西安 710055 2.长安大学 环境科学与工程学院，西安 710054 1.School of Information Control Engineering, Xi ’an University of Architecture Technology, Xi ’an 710055, China 2.School of Environment Science Engineering, Chang ’an University, Xi ’an 710054, China YAN Xiuying, REN Qingchang, MENG Qinglong. HVACSIM+ and MATLAB-based simulation of air-condi- tioning system. Computer Engineering and Applications, 2012, 48 （15）：227-232. Abstract ：The simulation of the air-conditioning system and the optimized control of minimizing the energy con- sumption under the constraint of temperature are mainly studied. The simulation software HVACSIM+ for air-condi- tioning systems is introduced. The air handling unit and the rooms of the first floor of one building are taken as the simulation target; a simulation system is set up based on the platform of HVACSIM+. The function describing the re- lation between the consumption of cooling coil and the chilled water velocity is found and taken as the objective function, and with improved cyclic variable method the controller ’s parameters are optimized under MATLAB envi- ronment. The HVACSIM + simulator is run again to calculate the energy consumption supplied by the cooling source. Results show that the system runs steadily while the controller works with the optimal parameters and the en- ergy consumption of the cooling coil is greatly reduced compared with working in non-optimized condition. Key words ：Heating, Ventilation and Air-Conditioning （HVAC ）simulation plus other systems; simulator; opti- mized control; cyclic variable method 摘 要：研究了空调系统的仿真及一定温度要求下的最小能耗优化控制。介绍了大型空调系统仿真软件 HVACSIM+ ；以某大厦一层中央空调系统的空气处理系统以及空调房间为仿真对象，进行HVACSIM+