Altium_Designer_6_DRC规则检查的英汉对照表精选.pdfVIP

Altium Designer 6 DRC规则检查的英汉对照表 ：lc_258 2008-12-20 3:19 PM Ⅰ、Error Reporting 错误报告 A：Violations Associated with Buses 有关总线电气错误的各类型（共12项） ◆ bus indices out of range 总线分支索引超出范围 ◆ Bus range syntax errors 总线范围的语法错误 ◆ Illegal bus range values 非法的总线范围值 ◆ Illegal bus definitions 定义的总线非法 ◆ Mismatched bus label ordering 总线分支网络标号错误排序 ◆ Mismatched bus/wire object on wire/bus 总线/导线错误的连接导线/总线 ◆ Mismatched bus widths 总线宽度错误 ◆ Mismatched bus section index ordering 总线范围值表达错误 ◆ Mismatched electrical types on bus 总线上错误的电气类型 ◆ Mismatched generics on bus (first index) 总线范围值的首位错误 ◆ Mismatched generics on bus (second index) 总线范围值末位错误 ◆ Mixed generics and numeric bus labeling 总线命名规则错误 B：Violations Associated Components 有关元件符号电气错误（共20项） ◆ Component Implementations with duplicate pins usage 元件管脚在原理图中重复被使用 ◆ Component Implementations with invalid pin mappings 元件管脚在应用中和PCB封装中的焊盘不符 ◆ Component Implementations with missing pins in sequence 元件管脚的序号出现序号丢失 ◆ Component contaning duplicate sub-parts 元件中出现了重复的子部分 ◆ Component with duplicate Implementations 元件被重复使用 ◆ Component with duplicate pins 元件中有重复的管脚 ◆ Duplicate component models 一个元件被定义多种重复模型 ◆ Duplicate part designators 元件中出现标示号重复的部分 ◆ Errors in component model parameters 元件模型中出现错误的的参数 ◆ Extra pin found in component display mode 多余的管脚在元件上显示 ◆ Mismatched hidden pin component 元件隐藏管脚的连接不匹配 ◆ Mismatched pin visibility 管脚的可视性不匹配 ◆ Missing component model parameters 元件模型参数丢失 ◆ Missing component models 元件模型丢失 ◆ Missing component models in model files 元件模型不能在模型文件中找到 ◆ Missing pin found in component display mode 不见的管脚在元件上显示 ◆ Models found in different model locations 元件模型在未知的路径中找到 ◆ Sheet symbol with duplicate entries 方框电路图中出现重复的端口 ◆ Un-designated parts requiring annotation 未标记的部分需要自动标号 ◆ Unused sub-part in component 元件中某个部分未使用 C：violations associated w