毕业论文终稿-一种校园电动洒水车概念设计(通过答辩).doc

毕业设计 题 目 一种校园洒水车概念设计 学生姓名 学 号 系 部 专 业 班 级 指导教师 二〇一五年X月  摘要 曾经有人说过决定21世纪发展的是能源,上世纪70年代全球三次石油危机爆发后，各跨国汽车公司先后开始研发各种类型的电动汽车。我国经过“八五”、“九五”、“十五”三个五年计划，在研发电动汽车的专项上投入了大量的人力、物力和财力，并取得了一系列科研成果，但是,迄今为止，这些科研成果真正能转化为产品，并实现产业化生产的项目并不多。本文主要介绍一种校园电动洒水车的概念设计，其采用全电力驱动。 本文设计一种校园电动洒水车的概念设计，其包括电动汽车本体结构、驱动电源、洒水水箱、管路、水泵和水泵电机等组成。洒水工作通过电机带动水泵产生水压，最后由管路洒水头完成洒水工作。本文首先确认校园电动洒水车方案，完成关键部件设计计算，然后利用三维SOLIDWORKS完成校园电动洒水车的三维建模，并导出二维工程图，最后利用SOLIDWORKS对校园电动洒水车进行运动仿真。 关键词：校园电动洒水车，管路，运动仿真，三维建模  Abstract Someone once said that the development of energy is decided in twenty-first Century 70 of the last century, the three global oil crisis, the multinational automobile company has started the research and development of various types of electric vehicles. After our country eight five, Nine Five, fifteen three five year plan, a large amount of manpower, material resources in the research and development of electric vehicles and special resources, and achieved a series of research results, but, so far, these research results can be transformed into real products, and to achieve industrialization the production of the project is not much. This paper mainly introduces the design concept of a campus electric sprinkler, the full electric drive. This paper designs a concept design of campus electric sprinkler, which comprises electric car body structure, driving power, water tank, pipeline, water pump and water pump motor etc.. Sprinkler work drives the water pump through the motor cause pressure, and finally by the pipeline sprinkler sprinkler work completed. This paper first confirms the campus electric sprinkler scheme, complete the key components of the design calculation, 3D modeling and 3D SOLIDWORKS to complete the campus electric sprinkler, and the output of engineering drawing, finally the use of SOLIDWORKS motion simulation was carried out on the campus of electric sprinkler. Keywords: campus electric truck, pipeline, motion simulation, 3D modeling 目录 摘要 i Abstract ii 第一章