SACS建模案例(步骤清晰).docxVIP

Part 1 - Structural modeling In windows file explorer, Create “Training Project” directory, and create “Structural Modeling” subdirectory. In SACS executive, use “Settings” “SACS System Configuration”, make sure default units set to “Metric KN Force”. Set current working directory to “Structural Modeling” and launch Precede program and using following data, Creating Jacket, Select “Create New Model” and input “TEST MODEL WITH WEIGHT CAPABILITIES” for title. Select “Jacket” in Structure Wizard and check “Generate Seastate hydrodynamic overrides”. 4 Leg 4 Pile (ungrouted) jacket platform Water depth 79.5 m Working point elevation: 4.0 m Pile connecting elev: 3.0 m Mudline elevation and pile stub elevation: -79.5m Other intermediate elevations: -50.0, -21.0, 2.0, 15.3, 23.0 m Conductors: None Skirt Piles: None Working point spacing: X1=15 m, Y1=10 m Pile/Leg Batter: Row 1 (leg 1 and leg 5, left two legs) X=0, Y=10 Row 2 (leg 3 and leg 7, right two legs) X=10, Y=10 Save model to SACINP.DAT file. Define member properties; Member Group LG1, LG2, LG3, Segment 1: D = 107 cm, T = 3.5 cm, Fy = 34.50 kN/cm2, Segment Length = 1.0 m Segment 2: D = 105 cm, T = 2.5 cm, Fy = 24.80 kN/cm2 Segment 3: D = 107 cm, T = 3.5 cm, Fy = 34.50 kN/cm2, Segment Length = 1.0 m Member Group LG4, Segment 1: D = 107 cm, T = 3.5 cm, Fy = 34.50 kN/cm2 Member Group LG5, Segment 1: D = 91.50 cm, T = 2.50 cm, Fy = 34.50 kN/cm2 Member Group LG6, Segment 1: D =91.5 cm, T = 2.0 cm, Fy = 24.80 kN/cm2 Segment Length = 1.0 m Segment 2: CONE Fy = 24.80 kN/cm2, Segment Length = 1.0 m Segment 3: D = 91.5 cm, T = 2.0 cm, Fy = 24.80 kN/cm2 Member Group PL1, PL2, PL3 and PL4, Segment 1: D = 91.5 cm, T = 2.5 cm, Fy = 24..80 kN/cm2, Flooding, Member Group W.B, Segment 1: D = 60.0 cm, T = 2.0 cm, Weight Density = 0.001, Flooding, Member Section CONE, Outside D = 91.50 cm, Inside d = 66.0 cm and Wall thickness T = 2.0 cm Save model. Member section and member groups defined at this time shall looks like foll