modulation spectrum equalization for robust speech recognition鲁棒语音识别调制频谱均衡.pptVIP

MODULATION SPECTRUM EQUALIZATION FOR ROBUST SPEECH RECOGNITION Source: Automatic Speech Recognition Understanding, 2007. ASRU. IEEE Workshop on Author : Liang-che Sun , Chang-wen Hsu, and Lin-shan Lee Professor : 陳嘉平 Reporter : 楊治鏞 Introduction The performance of speech recognition systems is very often degraded due to the mismatch between the acoustic conditions of the training and testing environments. In this paper, we propose a new approach for modulation spectrum equalization in which the modulation spectra of noisy speech utterances are equalized to those of clean speech. Introduction The first is to equalize the cumulative density functions (CDFs) of the modulation spectra of clean and noisy speech, such that the differences between them are reduced. The second is to equalize the magnitude ratio of lower to higher components in the modulation spectrum. Modulation spectrum (1/2) Given a sequence of feature vectors for an utterance, each including D feature parameters, where n is the time index, and is the parameter index. Modulation spectrum (2/2) The modulation spectrum of the -th time trajectory can be obtained by applying discrete Fourier transform: Spectral Histogram Equalization We first calculate the cumulative distribution function (CDF) of the magnitudes of the modulation spectra, , for all utterances in the clean training data of AURORA 2 to be used as the reference CDF, . For any test utterance, the CDF for its modulation spectrum magnitude, , can be similarly obtained as . Spectral Histogram Equalization Hence the equalized magnitude of modulation spectrum is Magnitude Ratio Equalization We first define a magnitude ratio (MR) for lower to higher frequency components for each parameter index as follows: where is the cut-off frequency used here, is the order of the discrete Fourier transform. Magni