电气工程及其自动化专业英语 Chapter 3 Power Electronic Technology.pptVIP

Section 3 DC-AC Converters zero DC component, single-phase or three-phase signal. The load is a R-L-C load, an AC voltage or an AC current sink. Control parameter may be, as shall be seen later, an angle, a pulse width, a voltage or a current signal. The converter consists of switches, reactive components such as L, C, transformers and resistances. Switches including the diodes are assumed to be ideal and unidirectional, that is, they have zero on-state losses, zero off-state losses, zero switching losses and unrestricted voltage or current carrying Section 3 DC-AC Converters capa