康耐视产品系列_精品.pptVIP

* * * * * * * * * In this example, 4 inspections failed (at least in part) because the label position was outside of tolerance; 3 failed because the OCV inspection failed on the GTIN line; 5 failed because the OCV inspection failed on the SN line, etc. * * * * * * * * We sometimes forget that Cognex actually has a large installed base in healthcare manufacturing and is partnered with OEMs, machine builders, middleware providers and integrators who service the healthcare market. Make sure prospective customers also know this! * * * * * Goal of Cognex Connect program: In-Sight interfaces to an amazing range of automation vendors It is a great delta compared to our competitors The capability exists, we just need to explain and promote better In the past we have not had a clear focus or message We now have a new name and identity to promote this capability Marketing Material Cognex Connect will be featured on our web sites Cognex Connect will be included in our future In-Sight Product Guides Cognex Connect will be promoted in our marketing programs Sales Tools We will circulate a summary sheet to all SEs to summarise our capabilities This summary sheet will include a summary of our competitors capabilities * “serial communications” for the other robots send/receive configured strings and Native Mode Commands in Spreadsheet Quite a few of the newer robot controllers can also use Ethernet (with native mode commands) * Basic 1-slide summary * * Basic 1-slide summary * C and CS mount lens supported – 1 inch format (Fujinon and schneider lenses) -less expensive option than F mount Line Scan imager: Averages 2 lines For 14 x 28 micron effective pixel size, doubles the sensitivity. Think of this as a larger area to collect light. Why 1K? Well a 2K imager - can’t physically fit a 14 micron pixel size imager into the IS5600 case, so would use 7 or 10 micron ? need more light and/or slower shutter speed Could not support a C or CS mount lens (due to size) ? customers mu