辽宁工业大学SDH光网络设计与实现 (3).docVIP

光纤通信 课程实训(论文) SDH光网络设计与实现 院（系）名称 电子与信息工程学院 专业班级 学号 学生姓名 指导教师 起 止 时 间： 课程实训（论文）任务及评语 院（系）：电子与信息工程学院 教研室：通信工程 学 号 学生姓名 专业班级 课程 实训（论文）题目 SDH光网络设计与实现 课程实训（论文）任务 设计内容 根据网络拓扑图，完成设计 性能指标及技术要求 1、建立光网络A、B、C、D、E、F、G七个节点，完成IP地址设计； 2、根据环速率，完成单板选择及安装； 2、建立拓扑连接； 3、完成业务配置：B-F 5个2Mb/s； A-C 2个34Mb/s； E-G 3个2Mb/s。 4、完成系统时钟设计，设B为主时钟源。 5、完成A-C 的通道保护。 指导教师评语及成绩 平时成绩： 答辩成绩： 论文成绩： 总成绩： 指导教师签字： 年 月 日 注：平时成绩占20%，答辩成绩占40%，论文成绩占40%。摘 要 SDH（Synchronous?Digital?Hierarchy）系统的开发主要包括后台数据库的建立和维护以及前端应用程序的开发两个方面。Abstract SDH (synchronous digital hierarchy and synchronous digital transmission system) is a multiplex, transmission and exchange function to merge into an integral whole, and by the unified network management system operation of the integrated information transmission network. SDH can achieve effective management of the network, real-time business monitoring, dynamic network maintenance and many other features, can greatly improve the network resource utilization, reduce the management and maintenance costs, and realize flexible and reliable and efficient network operation and maintenance. The system development mainly includes two aspects: the establishment and maintenance of back-end database and front-end application development. This design by ZTE Corporation ZXMP320 transmission equipment are based on SDH optical network design and implementation, the whole process of a complete optical transmission system. This paper introduced the basic principle of SDH optical network and briefly introduces the ZTE Corporation ZXMP320 equipment, at the same time, the SDH optical network training task in building a network node, veneer installation, clock configuration and multiplex section protection of a series of process were detailed analysis and design. Key words：Single board installa