redhatmp3指令.doc

基于linux的嵌入式PXA270的MP3播放器设计 [lym@localhost lym]$ su Password: [root@localhost lym]# ls VMwareTools-6.0.1-55017.tar.gz vmware-tools-distrib [root@localhost lym]# cd vmware-tools-distrib/ [root@localhost vmware-tools-distrib]# ls bin doc etc FILES INSTALL installer lib vmware-install.pl [root@localhost vmware-tools-distrib]# ./vmware-install.pl 安装ToolChain交叉编译工具 cp /…/arm-linux.tar.gz /opt tar zxvf arm-linux.tar.gz vi /root/.bash_profile 在文件中添加：PATH=$PATH:/opt/arm-linux/bin source /root/.bash_profile arm-linux-gcc -v 解压及编译Boot Loader cp /…/Boot-XSBase270_010005.tar.gz /root/work tar zxvf Boot-XSBase270_010005.tar.gz cd Boot-XSBase270 make ls /root/work/Boot-XSBase270 烧写Boot Loader 到Flash cp /…/Jflash-XSBase270_010003.tar.gz /root/work tar zxvf Jflash-XSBase270_010003.tar.gz cp /root/work/Boot-XSBase270/boot /root/work ./jflashmm /root/work/boot 1方法一： geit /etc/profile;在出现pathmunge 的语句段后添加pathmunge /usr/local/arm/2.95.3（版本号）/bin； 保存对profile的修改后，执行source /etc/profile就OK了 2方法二：修改/etc/bash.bashrc文件???????????????? #vim /etc/bash.bashrc?? 在最后加上：??????????????? export PATH＝$PATH:/usr/local/arm/3.4.1/bin??????????????? export PATH 立即使新的环境变量生效，不用重启电脑： [lym@localhost lym]$ su Password: [root@localhost lym]# cd /usr/local [root@localhost local]# ls bin etc games include lib libexec sbin share src [root@localhost local]# mkdir arm [root@localhost local]# ls arm bin etc games include lib libexec sbin share src [root@localhost local]# cd /mnt/hgfs/share/gccc [root@localhost gccc]# ls ~$33GXGC.doc 33GXGC.doc arm-linux-4.4.1.tar.gz [root@localhost gccc]# cp arm-linux-4.4.1.tar.gz /usr/local/arm [root@localhost gccc]# tar zxvf arm-linux-4.4.1.tar.gz 。。。。。。。。。。。制作MP3 ./rootfs270/conf/ ./rootfs270/conf/xsbase270_config [root@localhost arm]# ls Jflash_Xsbase270 mkfs.jffs2 rootfs270 rootfs.img Jflash_Xsbase270.tar.gz mkrootfs.sh rootfs270.tar.gz rpm [root@localhost arm]# cd /mnt/hg