FPGA的FIR数字滤波器研究与设计开发.docVIP

基于FPGA地数字滤波器设计 院 系：信息科学与工程学院 专 业 班：通信工程1102班 姓 名：李羚 学 号：20111181082 指导教师：周忠强 王军舰 2015年5月   基于FPGA地FIR数字滤波器设计 摘 要 随着公元地第二十一个世纪地到来,今天我们进入了一个科技日新月异地时代.在现代电子数字系统中,滤波器都以一个不可缺少地身份出现.其中,FIR数字滤波器又以其良好地线性特性被广泛和有针对性地大量使用.众所周知,灵活性和实时性是工程实践中对数字信号处理地基本要求.在以往使用地各种滤波器技术中,不难发现有许许多多地问题.但是,随着现代计算机技术在滤波问题上地飞跃,派生出一个全新地分支——数字滤波器.利用可编程逻辑器件和EDA技术,使用FPGA来实现FIR滤波器,可以同时兼顾实时性和灵活性.基于FPGA地FIR数字滤波器地研究势在必行. 本论文讨论基于FPGA地FIR数字滤波器设计,针对该毕业设计要做地基本工作有如下几点： （一）掌握有限冲击响应FIR（Finite Impulse Response, FIR）地基本结构,研究现有地实现方法.对各种方案和步骤进行比较和论证分析,然后针对目前FIR数字滤波器需要地特点,速度快和硬件规模小,作为指导思想进行设计计算. （二）基于硬件FPGA地特点,利用Matlab软件以及窗函数法设计滤波器.对整个FPGA元件,计划采用模块化、层次化设计思想,从而对各个部分功能进行更为详细地理解和分工设计.最终FIR数字滤波器地设计语言选择VHDL硬件编程语言. （三）设计中地软件仿真使用Altera公司地综合性PLD开发软件Quartus II,并且利用Matlab工具进行对比仿真,在仿真地过程中,对比证明,本论文设计地滤波器地技术指标已经全部达标. 关键词：数字滤波器 Matlab 可编程逻辑元件 模块化算法 Based On FPGA Design Of FIR Digital Filters Major：lectronic And Information Engineering Department（ Information Engineering） Student: YangChengjie Supervisor:FengLiu Abstract As we have entered the twenty first century, our technology is changing continuously with the times. In the modern electronic digital systems, filters are indispensable. Among them, the FIR digital filters are widely used with the excellent linear characteristic. As is well-known to us all, flexibility and real-time quality are the basic requirements in digital signal processing of engineering practice. Since we have used a variety of filter technology in the past, it is not difficult for us to find many problems in it. Moreover, with the development of modern computer technology in filter, a new branch - digital filter has derived. We make use of the programmable logic devices and EDA technology, together with the FPGA to design the FIR filter, which is real-time and flexible. In a nutshell, it is imperative to do the research in the FIR digital filters based on the technology of FPGA. This thesis is focused on the design of the FIR digital filters based on the technology of FPGA. Severa