电子图方案机械工程专业英语MechanicalEngineeringEnglish第1部分机械工程基础Part1FundamentalsofMechanicalEngineering单元5.ppt

11. Drawing number. This generally serves as a filing number and may furnish information in code form. Letters and numbers may be so combined to indicate departments, plants, model, type, order number, filing number, and so on. The drawing number is sometimes repeated in the upper-left-hand corner (in an upside-down position), so that the drawing maySome titles furnish information such as material, part number, pattern number, finish, treatment, estimated weight, superseded drawing number, and so on. Assembly Drawings Adrawing that shows the parts of a machine or machine unit assembled in their relative working positions is an assembly drawing. There are several types of such drawings: design assembly drawings, working assembly drawings, unit assembly drawings, installation diagrams, and so on. Working Assembly Drawings Aworking assembly drawing, showing each piece completely dimensioned, is sometimes made for a simple mechanism or unit of related parts. No additional detail drawings of parts are required. Subassembly (Unit) Drawings Aunit assembly is an assembly drawing of a group of related parts that form a unit in a more complicated machine. Such a drawing would be made for the tail stock of a lathe, the clutch of an automobile, or the carburetor of an airplane. A set of assembly drawings thus takes the place of a complete assembly of a complex machine. Passage Ⅳ AutoCAD Words and Expressions package /pAkidV/ n. 程序包；组件；成套设备 reduced instruction set processor 简化指令集处理器 crosshair /krCshZE/ n. 横标线，十字线 plot /plRt/ n. 曲线；图表 dialogue box 对话框 pull-down /puldaun/ n. 下拉 inquiry /inkwaiEri/ n. 查询 layer /leiE/ n. 层 autoshade /R:touFeid/ n. 自动遮蔽 validate /vAlideit/ vt. 使生效，确认 solid modeling 实体造型 Boolean rule 布尔定律 extrude /ekst