基于VC_6_0的远程GPS信息采集系统设计和实现.pdf

2011 年 1 月 电 子 测 试 Jan.2011 第 1 期 ELECTRONIC TEST No.1 基于VC++6.0的远程GPS信息采集系统设计和实现★ 管想红 ，姚金杰 ，韩焱 （中北大学信息探测与处理技术研究所，山西 太原，030051） 摘 要: 针对现场采集数据存在安全隐患以及操作员人身安全等问题，提出了基于VC++6.0与GPS接收模块的 远程数据采集方案。根据Windows环境下应用Socket网络编程原理,采用多线程设计了以带有友好操作界面的 控制端——客户机、响应速度高的受控端——服务器及GPS接收模块为主要组成硬件和以VC++6.0 为软件的 远程GPS信息采集系统。实验结果表明,系统实现了远程GPS信息的采集功能，消除了现场安全隐患。该系统 可广泛应用于远程测试及设备远程健康诊断技术中。 关键词: 网络通信；串口通信；多线程 中图分类号: TP273 　　文献标识码: B　 Design and implementation of remote GPS information collection system based on VC + +6.0 Guan Xianghong，Yao Jinjie，Han Yan （National Key Laboratory of Electric Testing Technology,North University of China，Taiyuan 030051,China） Abstract: For data collected at the scene, as well as operator safety issues such as personal safety, this paper put forward program of the remote data acquisition based on VC + +6.0 and the GPS receiver module. Windows environment in accordance with the application of the principle of network programming Socket, designed remote GPS data collection system to interface with the control of friendly client - the client, the controlled response to the high-speed client - server and GPS receiver module for the major components of hardware and to VC + +6.0 for software. The experimental results show that the long-range GPS system information collection capabilities, eliminating the security risks at the scene. The system can be widely used in remote testing and diagnostic equipment technology in remote health. Keywords: network communications; serial communications; multi-thread ★基金项目 ：国家自然科学基金资助资助 46 测试工具与解决方案