工厂自我评估中英文对照.pdfVIP

FactoryEvaluation:SelfAssessment 工厂评估：自我评估 AllfactoriesengagedintheproductionofCGroupPlcmerchandisemustmeetminimum standardsineachofthefollowingareas: 所有从事生产C集团商品的工厂必须满足以下方面的最低要求 1.EmploymentEthics 雇佣道德 2.HealthSafetypractices 健康和安全保障 3.TechnicalCompetence,relativetotheproducttheywillproduce 生产相关产品的技术能力 4.QualityAssurancesystems 质量保证系统 All suppliers to the C Group Plc must be familiar with these minimum standards, and must accommodate visits by C Group Plc personnel or their appointed agents to evaluate and audit a factory’scompliance. 所有C的供货商都必须熟悉这些最低要求，并且为对工厂进行评估的C人员或其指定的人 员提供协助。 * Suppliers are reminded that all premises involved in manufacture aresubject to thesestandards. This includes any subcontracted processes. (Subcontracting is processes beng carried out by anotherfactoryunit.) 这些标准涵盖工厂的所有方面，包括外发转包生产工序(即由其它工厂承担的生产工序) *Subcontractingmustbedeclaredatthetimeoforderplacement 外发转包工序必须在合同签定时注明清楚 * Manufacturing processes conducted from domestic premises arenot acceptableto C Group Plc. (Exceptional cases must have written approval of an C Group Plc Brand Director, prior to order placement). C不接受家庭作坊承担的生产工序(除非在下定单之前已得到C的书面确认) Theattached Self Evaluation Form should besubmitted to C Group Plcby a supplier proposing a newfactory,orasaninitialstageintheauditandapprovalprocessofanyexistingfactory. 所附之自评问卷必须在举荐一个新厂时或评估任何现存工厂的初期由供货商呈送C *A newfactorywillnotbeapproved,unlessminimumrequirementsareachieved. 任何新厂只有满足这些最低要求， 才可被接受 *Existingfactoriesmustconsistentlyachievetheminimums 现存工厂必须一贯满足这些最低要求 *Ifashortfallishighlighted,anactionplantorectifythismustbeagreed Timescalesmustbeagreedappropriatetothenatureanddegreeoftheissues. 对任何不符合点，工厂必须同意在适当的期限内采取改正措施 Youshouldbeawarethatalldetailsgivenwillbeverifiedthroughanauditprocess andwillincludeinterviewswithsomeofyour workers. 注意：你们所填的此份问卷中的所有细节将会在评估中加以确认，包括访问你们的一些工 人去确认。 *Allinformationgivenwillbetreatedinconfidence. 所有提供的数据将被保密