路由器配置访问控制列表ACL.docVIP

Routerenable Router#configure terminal Enter configuration commands, one per line. End with CNTL/Z. Router(config)#interface FastEthernet0/0 Router(config-if)# Router(config-if)#exit Router(config)#interface FastEthernet0/0 Router(config-if)#ip address Router(config-if)#no shutdown %LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up Router(config-if)#no ip address Router(config-if)# Router(config-if)#exit Router(config)#interface FastEthernet0/0 Router(config-if)# Router(config-if)#exit Router(