基于欧姆龙C40P型的两种液体混合控制系统设计推荐.docVIP

摘要 PAGE IV 基于欧姆龙C40P型的两种液体混合控制系统设计 摘 要 以两种液体的混合罐装控制为例，将两种液体按一定的比例混合，在电动机搅拌后要达到一定的温度才能将混合的液体输出容器，并形成液态。液体混合系统的控制设计考虑到其动作的连续性以及各个被控设备动作之间的相互关联性，针对不同的工作状态，进行相应的动作控制输出，从而实现液体混合系统从第一种液体加入到混和完成输出的这样一个周期控制工作的程序实现。设计以液体混合控制系统为中心，从控制系统的硬件系统组成、软件选用到系统的设计过程（包括设计方案、设计流程、设计要求、梯形图设计等），旨在对其中的设计及制作过程做简单的介绍和说明。设计采用日本欧姆龙（OMRON）公司的C40P型PLC去实现设计要求。 关键词：多种液体、混合装置、自动控制 Based on the Omron C40P PLC two fluids mix control system design ABSTRACT In two of the liquid mix canned control as an example, the two liquid rata mixed, stir in the motor must reach a certain temperature can be mixed with the liquid output container, and forming liquid. Liquid mixed system of control design taking into account the continuity of its actions and individual charged device action between the relevance, for different work status, make the appropriate actions to control the output, enabling liquid hybrid system from the first liquid added to the mix and the complete output of such a cycle control of program implementation. Design to liquid mixture control system for the Centre, from the control system hardware systems, software selection to system design process (including the design, design processes, design requirements, ladder diagram, etc), designed to entice them to design and production processes do simple introduction and description. Design use Omron (OMRON) company of C40P PLC to implement design requirements. KEYWORDS: multiple liquid, mixing equipment, automatic control 前言 目　录 TOC \o 1-3 \h \z \u HYPERLINK \l _Toc264540371 前　言 PAGEREF _Toc264540371 \h 2 HYPERLINK \l _Toc264540372 第1章 液体混料装置控制系统的方案设计 PAGEREF _Toc264540372 \h 4 HYPERLINK \l _Toc264540373 1.1总体方案设计 PAGEREF _Toc264540373 \h 4 HYPERLINK \l _Toc264540374 1.2 PLC的选择 PAGEREF _Toc264540374 \h 5 HYPERLINK \l _Toc264540375 第2章 硬件电路设计 PAGEREF _Toc264540375 \h 10 HYPERLINK \l _Toc264540376 2.1 总体设计 PAGEREF _Toc264540376 \h 10 HYPERLINK \l _Toc264540377 2.1.1 传感器的选择 PAGEREF _Toc264540377 \h 12 HYPERLINK \l _Toc264540378 2