角磨机使用安全.pptVIP

Grinding machine wheels Surface Grinder Grinding machine wheels Mini-straight Grinder It’s compatible wheels Grinding machine wheels Pedestal Grinder Mounting of Depressed Centre wheel on Surface Grinder Unsafe Method Mounting of Wheel on Surface Grinder Unsafe Method Mounting of Wheel on Surface Grinder Unsafe Method Mounting of Wheel on Surface Grinder Unsafe Method Mounting of Wheel on Surface Grinder Unsafe Method Mounting of Wheel on Surface Grinder Mounting of Depressed Centre wheel on Surface Grinder Grinding machine wheels Straight Grinder Unsafe method of mounting of wheel on Straight Grinder Mounting of Grinding wheel on Straight Grinder Mounting of Grinding wheel on Straight Grinder Mounting of Grinding wheel on Straight Grinder Mounting of Grinding wheel on Straight Grinder Mounting of Grinding wheel on Straight Grinder Precautions Before During Usage Flanges Mounting Machine Visual Inspection Labels Safety Devices FLANGES Flanges are very important Both flanges DIA to be same Flange DIA to be atleast 1/3 dia of wheel Flanges must be relieved MOUNTING Wheel must easily fit on the spindle. MUST NOT BE LOOSE It bore is tight keep the wheel aside. DO NOT TRY TO INCREASE BORE SIZE MACHINE Machine should be well maintained. There should be no vibration There should be no belt slipage Bearing should be in good condition VISUAL INSPECTION Visually inspect wheel for cracks Check for damage during storage/transit/handling Do not use such wheel CHECK LABELS Maximum operating speed (MOS) is mentioned on the wheel. Ensure machine speed is less than MOS Resin bonded wheels have expiry date. See that the expiry date has not passed Read safety and implement LOGOS on the label SAFETY DEVICES Use machine guards Use Ear Plug Use Face shield Most important Use the wheel in the manner it is designed for If correctly used they are very useful tools If incorrectly used – “Make sure God is on your side” * Mini-Surface Grinder RPM = 6600 RPM = 9000 R