单片机液晶1206万年历程序.docxVIP

单片机液晶1206万年历程序主函数程序#includereg51.h#include1602.h#includeds1302.h#include24c02.h#includetemp.h#define uchar unsigned char #define uint unsigned intsbit s1=P3^1; //功能键sbit s2=P3^0;//增加键sbit s3=P3^2;//减小键sbit rd=P3^7; uchar key;uchar miao,fen,shi,ri,yue,temp;uchar nian;void write_sfm(uchar add,uchar date)//写时分秒函数{uchar shi,ge;shi=date/16;//分解一个2位数的十位和个位ge=date0x0f;write_com(0x80+0x40+add);write_date(0x30+shi);write_date(0x30+ge); }void write_nyr(uchar add,uchar date)//写年月日{ uchar ge,shi; shi=date/16;ge=date0x0f;write_com(0x80+0x00+add);write_date(0x30+shi);write_date(0x30+ge);}void Ds1302Init() //ds1302{miao=0x12;fen=0x12;shi=0x12;ri=0x29;yue=0x09;nian=0x16;Ds1302Write(0x8e,0X00); //禁止写保护，就是关闭写保护功能Ds1302Write(0x80,miao); // 秒Ds1302Write(0x82,fen); //分Ds1302Write(0x84,shi); //时//Ds1302Write(0x8a,zhou); //周Ds1302Write(0x86,ri); //日Ds1302Write(0x88,yue); //月Ds1302Write(0x8c,nian); //年Ds1302Write(0x8e,0x80); //打开写保护功能}void Ds1302ReadTime() //ds1302{miao = Ds1302Read(0x81);fen = Ds1302Read(0x83);shi = Ds1302Read(0x85);//zhou = Ds1302Read(0x87);ri = Ds1302Read(0x87);yue = Ds1302Read(0x89);nian = Ds1302Read(0x8d);}void wendu(int temp){uchar datas[] = {0, 0, 0,0, 0}; //定义数组 float tp; if(temp 0)//当温度值为负数 { write_com(0x80+0x00+15); write_date(-); //显示负temp=temp-1;temp=~temp;tp=temp;temp=tp*0.0625*100+0.5; } else { write_com(0x80+0x00+15); write_date(+); //显示正tp=temp;temp=tp*0.0625*100+0.5;}datas[0] = temp / 10000;datas[1] = temp % 10000 / 1000;datas[2] = temp % 1000 / 100;datas[3] = temp % 100 / 10;datas[4] = temp % 10; write_com(0x80+0x40+9);write_date(0x30+datas[0]);write_com(0x80+0x40+10); write_date(0x30+datas[1]); //十位write_com(0x80+0x40+11);write_date(0x30+datas[2]); //个位 write_com(0x80+0x40+12);write_date(.); //显示 ‘.’write_com(0x80+0x40+13);write_date(0x30+datas[3]); //显示小数点 write_com(0x80+0x40+14); write_date(0x30+datas[4]); //显示小数点 }void init(){rd=0;lcden=0;key=0;Ds1302Init();init_24c02();write_com(0x38);write_com(0x0c);write_com(0x06);write_com(0x01);write_com(0x80