AB PLC EtherNet IP 编程指导.pdf

ACR Motion Controllers 88-030031-01 A EtherNet/IP Programmer’s Guide Effective: October 2009 ENGINEERING YOUR SUCCESS. Parker Hannifin User Information Warning — ACR and Aries Controllers are used to control electrical and mechanical components of motion control systems. Test all motion systems for safety under all potential conditions. Failure to do so can result in damage to equipment and/or serious injury to personnel. ACR and Aries Controller products and the information in this guide, including any apparatus, methods, techniques, and concepts described herein, are the proprietary property of Parker Hannifin Corporation or its licensers and may not be reproduced, disclosed, or used for any purpose not expressly authorized by the owner thereof. Since Parker Hannifin constantly strives to improve all of its products, we reserve the right to change this user guide, software, and hardware mentioned therein at any time without notice. In no event will the provider of the equipment be liable for any incidental, consequential, or special damages of any kind or nature whatsoever, including but not limited to lost profits arising from or in any way connected with the use of the equipment, firmware, or this user guide. © 2009 Parker Hannifin Corporation All Rights Reserved Technical Assistance Contact your local automation technology center (ATC) or distributor. North America and Asia Germany, Austria, Switzerland Parker Hannifin Corporation Parker Hannifin GmbHCo.KG 5500 Business Park Drive Postfach: 77607-1720 Rohnert Park, CA 94928 Robert-Bosch-Str. 22 Telephone: (800) 358-9068 or (707) 584-7558 D