CDMA系统的研究与MATLAB仿真毕业设计论文.docVIP

CDMA系统的研究与MATLAB仿真-毕业设计论文 CDMA system research and simulation by MATLAB Abstract CDMA Code Division Multiple Access is a branch technology which based on the spectrum-spread of the digital communication. The spectrum spread is a kind of technology that expands the original signal frequency spectrum to a wide band in the transmission. It discriminates different users mainly by the different mutual orthogonal or as far as possible orthogonal random code. It can realize the communication which multi-users utilize the same frequency to connect to the system and the network. CDMA become more and more mature through the developments of several networks. The development of CDMA is very quick in China nowadays. The network configuration of CDMA is basically self-contained. CDMA will exert important functions in communication field as GSM in the future, but the amalgamation of CDMA and GSM is another direction. The simulation is the base of a system before it is used in the life, through which we can find the problems and correct them. Matlab is one of the most popular and vigorous software massively applied in science operation, automatic control, science cartography and correspondence simulation In my design, after studying the DS-CDMA system theory, take the Matlab to simulate it, mainly containing the PN code wide frequency design, the QPSKQuadrature Reference Phase Shift Keying modulation and demodulation circuit design, the channel decline analysis and so on; finally contrast and analyze the results The simulation results indicate that the system design is right overall. From frequency spectrum picture, we can know that the source signal’s frequency spectrum is greatly stretched; the error rate analysis indicated that the system has strong ability to resist the additive Gauss noise. MATLAB’s correspondence dynamic simulation superiority can be seen in this simulation. We can predict the result quickly from the simulation. Keywords: DS system; CDMA; PN spectru