桥式起重机的PLC控制系统的设计毕业设计说明书.doc

毕业设计说明书 设计 专业 学生姓名 班级 学号 指导教师 完成日期  的控制设计 摘 要：着科技的进步, 研究可编程序控制器（PLC）在中的控制运用是一个非常有意义的课题。本次内容为用可编程序控制器（PLC）控制。主要目的是解决目前控制中存在的一些问题，合理地利用PLC的硬件资源和软件资源，充分利用各种指令的简化控制程序，做到控制程序应尽量简单，便于理解，并有一定的规律性以便能适合于不同控制的要求。关键词：；PLC； The Design of bridge type derrick -control Abstract: Programming logic controleis a kind of is an industry control design of appropriation calculator, have an extensive application in various auto control system. Make use of PLC to carry on the technique reformation to the old equipments, is the factory exaltation equipments utilization, raise the product quality and yield, ease the valid path that the worker labors strength.In modern society, Bridge came has been applied different enterprise such as metallurgical industry ,chemical industry ,shipping industry and so on .In order to guarantee its work safety measures ,it must be tested at regular intervals. On-the-spot automatic testing of came high efficiency and quality is achieved by programmable control technology. Bridge came plays a more and more important role in a lot of places . Along with research and the advance of science and technology may programming logic controler( PLC) in bridge came in control utilize is a very meaningful program.this design content is use the programming logic controler( PLC) control a bridge came . Major purpose is solution exist in present bridge came control some problems, use software resource and the hardware resource of PLC reasonably, raise the safe reliability of elevator and the flexibility of operation, reduce the input export port of PLC, use the easier control program of various instructions fully, accomplish control program should as far as possible simple. In order to needing to be carry on on the spot to the examination of the bridge came, will beg the examination control equipments and connect line convenience,easy to take,work credibility,control vivid, PLC can satisfy these requests. Key Words: Bridge came; PLC; Program  目 录 1 概