TSM安装配置.doc

1 TSM server安装 检查机器环境 uname -a cat /proc/version cat /etc/issue 安装JDK(如果没有安装，需要执行此步骤) modify /root/.bash_profile PATH=/opt/j2sdk1.4.2_08/bin:$PATH:$HOME/bin export PATH 安装tape驱动和tape util工具 rpm -i IBMtape-3.0.5-2.6.9-42.EL.x86_64.rpm.bin tar xvf IBMtapeutil.1.4.4.x86_64.tar.bin cd IBMtapeutil.1.4.4 make install 验证安装: cat /proc/scsi/IBMtape cat /proc/scsi/IBMchanger TSM 服务器安装 rpm -ivh TIVsm-server-5.4.0-0.x86_64.rpm rpm -ivh TIVsm-license-5.4.0-0.x86_64.rpm modify /root/.bash_profile export DSMSERV_DIR=/opt/tivoli/tsm/server/bin export DSMSERV_CONFIG=/opt/tivoli/tsm/server/bin/dsmserv.opt 手工启动方法TSM服务器方法 cd /opt/tivoli/tsm/server/bin nohup ./dsmserv quiet TSM 服务器初始化配置 调整tsm db,通过/opt/tivoli/tsm/client/ba/bin/dsmadmc 进入tsm管理界面(默认用户和密码,admin/admin),执行: define dbvolume /opt/tivoli/tsm/server/tsmdata/db01.dsm formatsize=2049 wait=yes extend db 2048 define logvolume /opt/tivoli/tsm/server/tsmdata/log01.dsm formatsize=1025 wait=yes extend log 1024 define spacetrigger db fullpct=85 spaceexpansion=25 expansionprefix=/opt/tivoli/tsm/server/tsmdata/ define spacetrigger log fullpct=85 spaceexpansion=25 expansionprefix=/opt/tivoli/tsm/server/tsmdata/ reduce db 16 reduce log 8 delete dbvolume /opt/tivoli/tsm/server/bin/db.dsm delete logvolume /opt/tivoli/tsm/server/bin/log.dsm 重启server: halt (注意,是在tsm里面执行) nohup /opt/tivoli/tsm/server/bin/dsmserv quiet 2 Tivoli Integrated console （ISC）集成控制台安装 在安装光盘的目录下，运行setupISC.exe 按照安装向导指示完成安装。 3 Tivoli administration center （AC）管理命令中心安装 将Administrator Center介质放入CD-ROM，运行安装文件： setupAC.exe 按照安装向导指示完成安装。 4 TSM 磁带库相关配置 修改TSM server配置文件 /opt/tivoli/tsm/server/bin/dsmserv.opt COMMmethod TCPIP TCPport 1500 VOLUMEHistory /opt/tivoli/tsm/server/bin/volhistoty DEVCONFig /opt/tivoli/tsm/server/bin/devcnfg.out 注册license文件 进入TSM server命令行，执行： register license file=*.lic 定义带库及其路径 define library 3584lib libtype=scsi define path tsmserver 3584lib srctype=server desttype=library device=/dev/IBMchanger0 online