官方说明书ST ST485B ST485C 数据手册.pdfVIP

ST ST485B ST485C handbook /file/2714286 From ManualL ManualL collects and classifies the global product instrunction manuals to help users access anytime and anywhere, helping users make better use of products. Home: / Chinese: / This Manual: /file/2714286 ST485B ST485C Low power RS-485/RS-422 transceiver Features ■ Low quiescent current: 300 µA ■ Designed for RS-485 interface application ■ - 7 V to 12 V common mode input voltage range ■ Driver maintains high impedance in 3-state or with the power OFF ■ 70 mV typical input hysteresis ■ 30 ns propagation delay, 5 ns skew DIP-8 SO-8 ■ Operate from a single 5 V supply ■ Current limiting and thermal shutdown for driver overload protection The ST485 is available in three temperature range: commercial (0 °C to 70 °C), industrial (- 40 ■ Allows up to 64 transceivers on the bus °C to 85 °C) and automotive (- 55 °C to 125 °C). Description The ST485 is al low power transceiver for RS-485 and RS-422 communication. Each part contains one driver and one receiver. This transceiver draw 300 µA (typ.) of supply current when unloaded or fully loaded with disabled drivers. It operates from a single 5 V supply. Driver is short-circuit current limited and is protected against excessive power dissipation by thermal shutdown circuitry that placed the driver outputs into a high-impedance state. The ST485 is designed for bi-directional data communications on multipoint bus transmission line (half-dupl