官方说明书intersil X9520 说明书.pdfVIP

X9520 ® Fiber Channel/Gigabit Ethernet Laser Diode Control for Fiber Optic Modules Data Sheet August 20, 2007 FN8206.2 Triple DCP, POR, 2kbit EEPROM Memory, Features Dual Voltage Monitors • Three Digitally Controlled Potentiometers (DCPs) The X9520 combines three Digitally Controlled - 64 Tap - 10kΩ Potentiometers (DCPs), V1/VCC Power-on Reset (POR) - 100 Tap - 10kΩ circuitry, two programmable voltage monitor inputs with - 256 Tap - 100kΩ software and hardware indicators, and integrated EEPROM - Nonvolatile with Block Lock™ protection. All functions of the X9520 are - Write Protect Function accessed by an industry standard 2-Wire serial interface. • 2kbit EEPROM Memory with Write Protect Block Lock™ Two of the DCPs of the X9520 may be utilized to control the • 2-Wire Industry Standard Serial Interface bias and modulation currents of the laser diode in a Fiber Optic - Complies to the Gigabit Interface Converter (GBIC) module. The third DCP may be used to set other various specification reference quantities, or as a coarse trim for one of the other two • Power-on Reset (POR) Circuitry DCPs. The 2kbit integrated EEPROM may be used to store