官方说明书intersil ISL22429 数据手册.pdf

ISL22429 ® Dual Digitally Controlled Potentiometer (XDCP™) Data Sheet September 26, 2006 FN6332.1 Low Noise, Low Power, SPI® Bus, 128 Taps, Features Wiper Only • Two potentiometers in one package The ISL22429 integrates two digitally controlled potentiometers (DCP) and non-volatile memory on a • 128 resistor taps monolithic CMOS integrated circuit. • SPI serial interface The digitally controlled potentiometers are implemented with • Non-volatile storage of wiper position a combination of resistor elements and CMOS switches. The • Wiper resistance: 70Ω typical @ 3.3V position of the wipers are controlled by the user through the SPI serial interface. Each potentiometer has an associated • Shutdown mode volatile Wiper Register (WR) and a non-volatile Initial Value • Shutdown current 5µA max Register (IVR) that can be directly written to and read by the user. The contents of the WR controls the position of the • Power supply: 2.7V to 5.5V wiper. At power-up the device recalls the contents of the • 50kΩ or 10kΩ total resistance DCP’s IVR to the corresponding WR. • High reliability The DCP can be used as a voltage divider in a wide variety - Endurance: 1,000,000 data changes p