官方说明书FAIRCHILD AN-3001 应用笔记.pdfVIP

FAIRCHILD AN-3001 Application Note /file/2690969 From ManualL ManualL collects and classifies the global product instrunction manuals to help users access anytime and anywhere, helping users make better use of products. Home: / Chinese: / This Manual: /file/2690969 Application Note AN-3001 Optocoupler Input Drive Circuits An optocoupler is a combination of a light source and a dropped across the resistor at the desired IF, determined from photosensitive detector. In the optocoupler, or photon other criteria. A silicon diode is shown installed inversely coupled pair, the coupling is achieved by light being parallel to the LED. This diode is used to protect the reverse generated on one side of a transparent insulating gap and breakdown of the LED and is the simplest method of achiev- being detected on the other side of the gap without an ing this protection. The LED must be protected from exces- electrical connection between the two sides (except for a sive power dissipation in the reverse avalanche region. A minor amount of coupling capacitance). In the Fairchild small amount of reverse current will not harm the LED, but it Semiconductor optocouplers, the light is generated by an must be guarded against unexpected current surges. infrared light emitting diode, and the photo-detector is a silicon diode which drives an amplifier, e.g., transistor. The The forward voltag