官方说明书ST STUSB06E 数据手册.pdfVIP

ST STUSB06E handbook /file/2714418 From ManualL ManualL collects and classifies the global product instrunction manuals to help users access anytime and anywhere, helping users make better use of products. Home: / Chinese: / This Manual: /file/2714418 STUSB06E 3.3 V USB transceiver Features ■ Compliant to USB v2.0 for full-speed (12 Mb/s) and low-speed (1.5 Mbps) operation ■ HBM = ± 9 kV on D+, D- lines, ± 7 kV on VREG ■ ± 6 kV ESD compliant to IEC-61000-4-2 on D+, D-, VREG lines BCC++16L ■ Separate I/O supply with operation down to (3 mm x 3 mm) 1.6 V ■ Integrated 150 kΩ switchable pull-up from D+ to VREG ■ Supports host negotiation protocol (DP pull-up auto-connection after SE0) Description ■ SEO active low interrupt in HNP mode (INT, VCC_IO referred) The STUSB06E is a single chip transceiver that complies with the physical layer specifications of ■ Very low power consumption to meet USB the Universal Serial Bus (USB) v2.0 standard. It is suspend current requirements powered by external 3.3 V supply and has an ■ No power supply sequencing requirements integrated 150 kΩ resistor to implement charger ■ Software controlled re-enumeration detection with weak pull-up method. (SOFTCON) The STUSB06E also supports sharing mode ■ Available in small BCC++16L package when VREG