3TFG-0005(FFG 2800)操作说明书机械部分(英文版).docVIP

General Operation 1 Overview This section describes safety precautions during machine operation, installation and running testing. 2 Safety Requirements 2-1 Safety Rules ● Obey safe production rules of the machine manufacturer as well as the plant ● Keep the work areas clean and tidy ● Check the machine before starting up, to make sure all protective devices are available and safety switches are in normal condition. ● Wear right uniform, and prepare all necessary articles (for example, gloves are needed while installing, checking and changing blade). ● Tie up hair and uniform or they may be caught by the running machine. ● Check if the machine is damaged or any component is worn and torn. The machine should be repaired or maintained by professional personal. ● Never touch the running parts with your hand or tools. ● The power supply should be cut while repairing, and take keys at anytime. ● Read the relevant materials provided by the manufacturer, and prepare the relevant medications for leak accidents. ● Keep other persons away from the work areas when start up or switch off the machine 2-2 Safe Operation Requirements To assure safety and correctness while operating, the following basic requirements should be kept. ● Read this manual, and make sure you understand all contents: The operation manual introduces safe and correct operations, and uses bold characters where necessary for warning. Do read and understand the contents and never attempt to try any operations which are not introduced in this manual. Our company won’t assume any liability for any injury or loss arising from operation not in line with this manual. Only those persons who receive special trainings and are qualified can operate the machine Only trained and qualified persons can operate the machine. They must be approved by safety supervisors of your company, and strictly observe relevant rules and regulations. Particularly, the operators must go through official electric safety review proceedings