GD-0003(GD12)单轴开槽单元操作说明书(英文版).docVIP

Single-Slotter unit 1 Overview ●Single-slotter unit processes the printed paperboard. It performs creasing、trimming、slotting、cutting and punching. ●The basic parts of the slotter unit include creasing shaft, creasing wheel, slotting head wheel shaft, cutting tool, upper and low push plates, drive lead screw (nut), prick gear, linear guide track, driving gear, punching module, motor, electric control components, etc., which form a relatively complete and independent work units. ●The single-slotter unit is provided with one pair of slotting shaft, and five pairs of head seats, which are used in trimming, slotting, and glue lap cutting. To assure completely lap cutting and durability of the cutting tools, a kind of steel-to-steel or steel-to-PU glue lap cutting system with flexible flap cutting mechanism. The glue lap cutting knife can be changed according to paperboard grade (for example 3-ply, 5-ply,7-ply). All cutting tools are made of high-grade steel, feature high hardness and durability, and produce very good trimming, slotting and glue lap cutting results. ●The transverse movement of the 5 pairs head seats of the machine are driven through ten pairs of lead screw nuts (or ball screw nuts). The motor with brake function drives the idler shaft through the coupling, drives the screw nut through prick gear, and drives the 5 pairs of push plates and head seats to move along the linear guide tracks agilely and accurately. Owing to the limit travel switch on the push plates, as two head seats move to together or head seat travel to the limit position, the motor will stop work and push plate can’t move forward, by which it avoids the lead screw and head seat be damaged. The upper and low head seats are driven together through idler shaft, so they aim at each other during movement, thus prolonging the service life of the cutting tools. The self-locking function of the brake and screw of the motor assures fixed transverse position of the head seats after adjustment. ●The