测量控制网平差系统设计毕业论文P212.docxVIP

测量控制网平差系统设计 PAGE  PAGE 189 毕业论文 测量控制网平差系统设计 摘 要 本软件的是以Visual Basic 6.0为开发环境，用ActiveBar制作主界面，软件应用的关键是控制网数据的输入，软件支持数据输入采用表格形式，当软件得到有关控制网的相关信息后，自动生成相匹配的表格，并且表格以不同颜色显示可编辑（也即必须填写）和不可编辑的单元表格。 平差数学模型采用间接平差，平差成果以表格形式显示，成果还包括一些重要的网行参数和平差参数，成果表格以不同颜色显示已知值和平差值，由于受时间的限制，平差软件只实现了简易平差的水准网、导线网、单三角锁，严密平差的单导线（符合导线、闭合导线和无定向导线）平差、导线网平差和高斯正反算、坐标换带、交会计算等。 操作简单，便于使用，提高软件的直观性是本软件的主要设计宗旨。 关键词：严密???差 高斯正反算 换带计算 Abstract The software is based on the Visual Basic 6.0 development environment. ActiveBar production with the main interface, the software applications, the key is to control network data input, software support, data entry using tabular form, the control software is network related information, Automatic Generation of match form in a different form and color indicates the editing (that is required) and an editing module forms. Adjustment mathematical model using indirect adjustment, the adjustment results in tabular form, the results also include some important parameters of the peace line network parameters poor results in a different form known color values indicate the margin of peace, Due to time constraints, software adjustment only a simple adjustment to achieve the standard networks, cable networks, single triangular locks, Adjustment tight single-wire (with wire coil, and non-directional wire) Adjustment. Traverse Network Adjustment and Gaussian positive and negative counting, coordinates exchange zone, intersection calculation. Simple, easy to use and improve software visualization software is the main design objectives. Key words : positive and negative close Adjustment Gaussian operator for the Calculation 目 录  TOC \o 1-3 \h \z \u  HYPERLINK \l _Toc169447094 引 言  PAGEREF _Toc169447094 \h 1  HYPERLINK \l _Toc169447095 第一章 软件设计平差计算的理论基础  PAGEREF _Toc169447095 \h 3  HYPERLINK \l _Toc169447096 1.1水准网简易平差  PAGEREF _Toc169447096 \h 3  HYPERLINK \l _Toc169447097 1.2导线测量简易平差  PAGEREF _Toc169447097 \h 3  HYPERLINK \l _Toc169447098 1.3单三角形