天津文化中心迎宾塔全铸钢结构分析-建筑与土木工程专业论文.docx

ABSTRACTThe traditional nodes cannot meet the requirements of modern architecture development well. Because of its unique advantages, the cast steel node shows the rationality and adaptability in engineering application. However, the current code does not give general requirements of the design of cast nodes, designers need carry out finite element analysis, full scale or reduced scale experimental studies combining with concrete engineering practice. According to the construction of Yingbin Tower in the Tianjin Center Park, this article carries out the research plan step by step.Firstly, this paper introduces the building scheme and the structure scheme of the program. The Yingbin Tower shows itself with the unique shape-wave, and it is the focal point of the Tianjin Center Park. In order to achieve the architectural effect better, it ultimately determines to use the all steel structure after repeated discussions.Secondly, the paper carries out the mechanical property analysis by MIDAS finite element software, then discusses the support reactions, member stresses and nodes displacements of the structure. The results show that the structural forces are well distributed and its level is not high, the structural stiffness is enough, the horizontal displacement is small and the structure has a good static performance. Under frequent earthquake action, the structure has enough stiffness, the support reactions, member stresses and nodes displacements also meet the requirements. The results of the research on the spokes system show that the spokes can help to reduce the horizontal displacement and increase the stiffness of the structure.Thirdly, this paper carries out the analysis of wind-induced response using time domain method and frequency domain method, then compares the results and gives a proper coefficient of wind-induced vibration. Combined with wind tunnel test report, the analysis shows that the across-wind displacement differs little with the along-wind displa