欧姆龙 SPU_PresentationMaterial.pptVIP

Storage Processing UnitIntroducing a New Product: SYSMAC SPU SYSMAC CS-series: High-speed Data Collection Unit SYSMAC SPU Unit Introduction The SYSMAC SPU Unit, a CPU bus unit for SYSMAC-CS series, collects PLC data in large volumes and at high-speed and save in external memory media. PCs (with such as SCADA software installed) were generally necessary to collect PLC’s I/O memory data before. Using SYSMAC SPU, PLC data can be collected at “high speed”, in “large volumes”, and “stably” and save them in memory cards in CSV format. SYSMAC SPU can… Collect device (machine) processing, operation and analysis data from the PLC to understand various trends accurately. In addition, the SPU expands PLC’s application range, such as production process analysis, error analysis. SYSMAC SPU Feature 1 No PC necessary Previously, a PC was required to collect data from the PLC. With PC, there were such problems on its reliability and stability, as being unable to collect at expected speed using communication network, or unable to collect all the data. The SYSMAC SPU can collect the data with high speed and precision, connected directly to CS1 bus without unstable PCs, or communication. SYSMAC SPU Feature 2 High Speed Previously, collected PLC data using a PC at 100ms at max. Now with the SYSMAC SPU, collects at 5ms at max. Collects more detailed data assuredly for more accurate analysis. SYSMAC SPU Feature 3 Saving in CSV format Collected data are stored as text file in CSV format. Time stamp, index and each variable are recorded in one line. SYSMAC SPU Feature 4 Simple setting with SPU Basic Software(SPU-Console) The SPU enables collection setting, unit setting and basic trend graph display using SPU-Console, a SPU Basic Software, on the PC connected to the SPU via Ethernet. Setting is simple of SPU-Console: copying and pasting desired variables to be collected using a CX-Programmer variable table. In addition, variables registered in Excel can also be set by co