毕业设计（论文）-50型变速箱离合器轴压机的改进汇.doc

山东大学 毕业设计 设计题目：50型变速箱离合器轴压机的改进 姓名： 工领域： 学校导师姓名： ： 论文完成时间： 2012-3-17 答辩时间： 2012 年月 日Design Title: 50 transmission clutch shaft presses improvements By Liu Chao Under the Supervision of Prof. A Thesis Submitted to the University of Jinan In Partial Fulfillment of the Requirements For the Degree of ***** of Engineering University of Jinan Jinan, Shandong, P. R. China 摘 要 轴压机是在生产环节过程中用来压装轴套和附件的重要机电设备。本课题研究的目的就是为提高、改进压装轴套和其它附件的压装精度。 首先，对50型变速箱离合器轴压机的压装头进行总体方案的设计，主要分为两方面的设计：压装头的结构设计和动力系统的设计。 结构设计采用传统的设计方法，各部分结构在强度、稳定性等方面均达到要求。动力系统的设计方面，由于液压系统动作易实现，且动作准确，因此本设计采用液压传动系统来实现压装头的动作要求，在其设计中主要对液压系统、液压缸和液压站进行了设计。 通过对液压系统的优化设计可以提高离合器轴压机的压装精度，从而提高了压装的质量。由此可得，随着机械工业的发展，现代机电设备开始装备大量原件，包括电器元件，液压元件和气动元件，其中元件的选择和质量是决定主机工作质量的重要因素。 关键词：液压传动 准确 可靠 合理 ABSTRACT Axis press is in the process of production processes used to press-fit sleeve and accessories, electrical and mechanical equipment. The purpose of this research is to improve, improve the accuracy of press-fit bushings and other press-fit attachment. First, the 50-type gearbox and clutch shaft presses the press-fit the head of the overall program design, the design is divided into two aspects: pressure mounted head of structural design and power system design. Structural design using the traditional design methodology, the structural strength, stability, etc. to meet the requirements. Power system design, hydraulic system, action is easy to achieve, and accurate action, this design uses a hydraulic drive system to the action of press-fit head in their design, hydraulic systems, hydraulic cylinders and hydraulic station design . Clutch shaft presses the press-fit accuracy can be improved through optimization of design of the hydraulic system, thereby improving the quality of the press-fit. Thus available, with the development of machinery industry, the modern mechanical and electrical equipment equipped with a large number of originals, including electrical components, hydraulic components and pneumatic component