毕业设计（论文）-关于矿井下环境监测的论文汇.docVIP

提供全套毕业论文图纸，欢迎咨询 摘要 随着煤炭技术的发展，煤炭开采量的不断增加，保证矿井下工作人员的安全是不可忽视的。那么，对矿井下各种环境条件进行监测，就能有效预防矿井事故的发生。在信息时代，人们的社会活动将主要依靠对信息资源的开发及获取、传输与处理，而传感器是获取自然领域中信息的主要途径与手段。矿井环境的监测主要包括气体浓度（O2、CO等）、温度等，可以使用气体浓度传感器和温度传感器采集相关信息。 论文首先介绍了选题的目的与意义、国内外的发展现状、课题的内容；之后完成系统模块各器件的选型，包括核心芯片的介绍、电源核心芯片TPS63031的介绍、KE-25氧气传感器的介绍；然后说明了系统的硬件构成和软件设计，包括CC2430单片机外围电路设计、时钟部分设计、系统电源设计、氧气浓度监测；最后对系统的软件部分进行了设计，包括氧气浓度监测模块的实现、温度监测模块的实现、模数转换的过程和无线数据传输模块的实现。 论文同时还对设计的整个过程进行了总结。 关键词： CC2430； 氧气传感器； 温度传感器； 无线数据传输 ABSTRACT With the development of coal technologies, increasing the amount of coal mining, to ensure the safety of staff of the mine can not be ignored. So, for the mine to monitor various environmental conditions can effectively prevent the occurrence of mine accidents. In the information age, peoples social activities will mainly rely on the information resources development and acquisition, transmission and processing, and the sensor is to obtain information in the field of major natural ways and means. The principal environmental monitoring mine gas concentration (O2, CO, etc.), temperature, etc., may be used gas concentration sensor and a temperature sensor to collect information. Firstly, introduces the purpose and significance of the topic, development status at home and abroad, the subject of the content; after the completion of the selection system modules each device, including who introduced core chip, chip TPS63031s power core, KE-25 oxygen sensor introduction, PT100 temperature sensor introduced; then explains hardware configuration and software design of the system, including CC2430 single-chip peripheral circuit design, the clock part of the design, the system power supply design, oxygen concentration monitoring; and finally the software part of the system has been designed, including oxygen achieve concentration monitoring module for temperature monitoring module, to achieve analog to digital conversion process, and wireless data transmission module. Paper but also on the entire design process ar