毕业设计（论文）-加工箱体零件上六孔的组合机床设计汇.docVIP

摘 要 本说明书是根据四川理工学院机电工程系机制专业毕业设计的基本要求而编制的。本次毕业设计我设计的课题是设计。该箱体零件结构，体积大。为了提高生产效率和降低劳动强度，专门设计组合及其专用夹具。本设计说明书四：工艺的编制，等第为组合设计的机床是。从工件定位及夹紧可靠，保证加工精度出发，选择卧式面非刚性轴组合床。并绘制了加工工序图，加工示意图和卧式面组合床的联系尺寸图。2007年5月The preparation of this statement is based on the requirements of Professional mechanism, Electrical and Mechanical Engineering, in Sichuan Polytechnic graduation .My graduated design here is the combination of machine design of dishes on processing box parts .Parts of the box’s structure is simple, not big in size, we can use the general machine to processing .But, in order to improve production efficiency and reduce labor intensity, the Modular Machine and its Special fixture of double-drilling processing is specially designed. The design of brochures includes three chapters ;Basic methods of Modular Machine Design is introduced in chapterⅠ ;Chapter II includes preparation of “the process of Modular Machine”, determinie of the cutting consumption about Modular machine, machine design ect; The design of Modular machine’s spindle box is described in Chapter III ;The fourth chapter is the conclusion. Machine designed here is a double-Manufacturing Machine. From positioning of workpiece, clamping reliable, guaranteeing processing accuracy, Modular machine of horizontal-Double and non-rigid shaft is used here. Also, Machining process map, Processing map as well as contacting-size chart of double-Manufacturing Machine are all drawed. The whole design Implements present national standards. Designers May 2007 Keywords: Box Parts; Modular Machine Tools; Multi- axial Box 第一章 概述 组合机床的组成和特点: 组合机床是根据工件加工需要,以大量通用部件为基础,配以少量专用部件组成的一种高效专用机床。 组合机床中各种部件都是具有一定独立功能的部件，并且大都是已经标准化、系列化和通用化的通用部件。只有多轴箱和夹具是根据工件的尺寸形状和工艺要求设计的专用部件，但其中绝大多数零件如夹压元件、传动件等也是标准件和通用件。 通用部件是组合机床的基础。用以实现机床切削和进给运动的通用部件，如各种工艺切削头、动力箱、动力滑台等动力部件。用以安装动力部件的通用部件，如底座等。 组合机床的特点： ⒈ 主要用于箱体零件和复杂的孔面加工。 ⒉ 生产率高。因为工序集中，可多面、多工位、多轴、多刀同时自动加工。 ⒊ 加工精度稳定。因为工序固定，可选用成熟的通用部件、精密夹具和自动工作循环来保证加工精度的一致性。 ⒋ 研制周期短，便于设计、制造和使用维护，成本低。因为通用化、系列化、标准化程度高，通用零部件占70-9