水污染精品教学课件：MBR-SMALL.pdfVIP

Small Wastewater Treatment Systems By Michael Albanese, P.Eng. H2FLOW EQUIPMENT INC. Why do you need one? • Typical Reasons – Enviromental Regulations – New Development – Failing Septic Systems – Cost of Sewers Pumping to Closest Municipality – Centralized Operations may be costly – Politics – Autonomy – Keeping the Water – Reuse What are you looking for? A low cost, highly efficient wastewater treatment system capable of consistently producing: 5-10 mg/L BOD 5-10 mg/L TSS 0.5-2 mg/L NH3 0.1-0.5 mg/L TP 200 FColi / 100ml TN ? ….. with minimal electrical cost, high degree of automation, low operator attention and minimal sludge production !! !! (I WILL ORDER ONE OF THOSE, THANKS VERY MUCH…..) Definitions • On-Site systems for 0 to 5m3/day and can be up to 20 m3/day • A small wastewater plant is usually referred to flows between 10 to 300 m3/day but can range up to 3800 m3/day • We will focus on 20m to 300m3/day range 5th Wheel Truck Stop WWTP – Dorchester, ON – 45m3/day SBR What is a Package Plant? • Term “package plant” is loosely used • Industry definition is a transportable plant that comes pre-assembled ready for plug and play, made in steel or pre-cast tankage • Sometimes this term is also used to refer to small pre-engineered plants which are poured in place concrete. Should be referred to as Pre-Engineered plants Sentinel WWTP – 33m3/day SBR Photos Courtesy of Fluidyne Package Pre-Engineered Plants Photo Courtesy of Eimco Water Inc. Photo Courtesy of Eimco Water Inc. PACKAGE PLANT PRE