外文翻译----高分子材料成型技术分析.docxVIP

外文翻译稿高分子材料成型技术分析聚合物成型加工技术在工业 ，实现快速发展高分子材料成型引进技术的发展，并探讨其创新性研究，并制订高分子材料成型加工技术的发展趋势。 [Keywords:] Polymer Material Forming TechnologyIn recent years, some special areas such as aerospace industry, defense Industry and other cutting-edge developments in the field performance of polymer materials put forward higher requirements, such as high strength, high modulus, light weight and so on, all kinds of specific requirements of high-strength Polymer Research and Development became increasingly urgent. 近年来，工业，国防一些特殊领域，如航空航天工业和其他尖端材料开发领域的聚合物重量和性能等方面提出了更高的要求，如高强度，高模量，重量轻，各种具体和要求的高强度聚合物的研究开发变得日益迫切。 1, polymer molding processing Technology Overview 1，聚合物成型加工技术简介 The past 50 years, the synthetic polymer Industry achieved great progress. 过去50年来，合成聚合物工业取得了很大进展。 For example, the grain structure with the extruder has been greatly improved, production has been greatly improved. 例如，粮食结构的挤出机有了很大的提高，生产有了很大的提高。 The 20th century, 60 years mainly in single-screw extruder, the output is about 3t / h; 70 years to the mid-80s, using continuous mixer single-screw extruder, the output is about 10t / h; Since the mid-80s. 20世纪60年代主要集中在单螺杆挤出机，产量约3吨/小时，70年来的80年代中期，利用连续混炼机单螺杆挤出机，产量约10吨/小时;自80年代中期。 Using twin-screw extruder gear pump granulation, the output can reach 40-45t / h, the future direction of Development is the production of up to 60t / h. 用双螺杆挤出机齿轮泵造粒，产量可达到40 -45吨/小时，未来的方向发展是向上生产到60T / h的 In l950, the worlds annual output of 2 million plastic t. 在1950，世界的万个塑料年产量为2吨 20th century 90s. 20世纪90年代。 Plastic yield an average annual growth rate of 5.8% in 2000 increased to 180 million t by 2010, the world plastics production will reach 300 million t, also. 塑料产量年均增长％，2000年平均率5.8提高到18000.0万吨，到2010年，世界塑料制品产量将达到300万t，也。 Synthesis of new industrial shock absorbers make it easier to control the resin glass is indeed the molecular structure, accelerating the deployment of large-scale low-cost production. 吸波材料的合成新的工业冲击使之更容易控制树脂玻璃的确是分子结构，加快生产部署大规模的低成本。 With the Development of automobile industry, energy sav